The text "G&G M4 GC16 Wart Hog 7"" in English remains "G&G M4 GC16 Wart Hog 7"". This is because it is a specific product name, which doesn't require translation.

Presentation

We are pleased to present the latest generation of mainstream replicas from G&G. It can be noticed that the base platform is the well-known M4, but as the Romanian saying goes, "it looks similar but not the same". The manufacturer has equipped this platform with the latest innovations in self systems and accessories, as well as a modern design, meant to offer better maneuverability. An even greater achievement of this platform is the electronicization of the replica, benefiting from the advantages of a mosfet that is hard to access for those on a tight budget.

Exterior of the replica

The replica in front of you is called GC16 Warthog and has a length of 7 inches. As mentioned, it is part of the mainstream category of replicas manufactured by G&G, but benefits from the latest innovations and technologies. The body is made of aluminum alloy, as well as the front rail system. The only ABS plastic elements are the handle and the stock of the replica. The rail system allows for KeyMod accessories. This system allows for a low profile when accessories are not mounted. The mounting of the rails itself is as simple and efficient as possible. The replica body features a new design meant to offer a pleasant and modern look, as well as an improved grip. It is equipped with multiple ambidextrous elements, meant to offer the possibility for both right-handed and left-handed users to exploit the replica. The fire selector is ambidextrous, as well as the magazine release button and the charging handle. The design of the grip, like the body, is meant to offer a firm hold. The stock retains the SOPMOD element of the two lateral compartments where the battery cells can be stored, but be careful, they are of slightly reduced dimensions, inserting a crane battery may pose difficulties. Obviously, the stock is adjustable in 6 positions, equipped with a spare compartment, and the cover rotates to provide access to the internal space. Pressing the button on the top is required to open it.
To secure the replica, there is an ambidextrous sling attachment point above the handle.

Interior of the replica

G&G has equipped this replica with the new generation, V2 gearbox, completely electronicized. The trigger assembly is replaced with an electronic unit equipped with microswitches, meant to offer improved reliability compared to classic brushes. In the rear part, there is a powerful mosfet capable of easily supporting an 11.1V LiPo. Apart from the greatly improved reliability, the advanced electronic setup will contribute to less battery consumption, a much smaller trigger response, and correct management of internal components, preventing premature wear. The cherry on top is the ability to implement a 3-round burst function instead of the full auto selection. The modification is done simply by holding down the semi mode on the trigger for 12 seconds. Internal components such as gears, piston, spring, and other components are standard. Each part that needs to be replaced must be carefully checked if it fits or not.
The hop-up chamber is made of plastic and the level of hop-up is adjustable. The replica's speed is 115-120 meters per second, measured with 0.20g BBs. The hop-up adjustment is located inside the ejection port. It requires pulling back the charging handle to access it.

Powering

The airsoft replica package does not include a battery or a battery charger. It is recommended to use an 11.1V 1000mAh crane or crane x3 battery. To access this battery storage space, just press a single button. Using a battery larger than 11.1V is not recommended as the airsoft replica can malfunction. It is recommended to use high-quality 0.25g BBs for optimal results. We advise against reusing BBs or using low-quality BBs as the replica may malfunction.