Specna Arms LiPo 11.1V 1300mAh crane battery x3

Description

The Nimrod LiPo battery pack consists of 3 cells, in a skull shape. It has a voltage of 11.1V and a capacity of 1300mAh. The battery technology allows for very compact dimensions of the entire assembly, making it possible to fit in tight battery compartments. The 20C discharge rate of the battery provides enough current supply for the replica's needs.

The battery pack insulation is well-made and the cables and connectors are of high quality.

ATTENTION:

• Lithium-ion Polymer (LiPo) batteries can be extremely dangerous.
• Users must take all precautionary measures for: potential fires, bodily harm, and property damage.
• If used improperly, damaged, or have manufacturing defects, LiPo batteries can cause explosions, fires, smoke, and risk of intoxication.
• By purchasing these types of batteries, users accept responsibility for any risks associated with LiPo batteries.
• LiPo batteries are not toys and should not be left within reach of children, as they can pose a real danger to their health.
• LiPo batteries should not be thrown into fire, placed in an oven, or microwave as they can explode.
• LiPo batteries contain/eminate electrolytes, toxic fumes, and other harmful chemicals. Handle these batteries with care and avoid, under any circumstances, contact with skin, eyes, or other parts of the body. In case of contact, rinse thoroughly with water and seek medical attention immediately.
• Do not attempt to charge mechanically or chemically damaged batteries.

Actions Leading to Battery Damage

• Charging LiPo batteries with unbalanced chargers and without automatic charge cut-off.
• Connecting in series or in parallel a cell or another battery even if they appear similar.
• Exceeding maximum and minimum operating voltages.
• A decrease or increase in temperature beyond the allowed limits.
• Too high charging current.
• Short-circuiting the battery terminals.
• Subjecting the battery to mechanical shocks such as dropping, hitting, bending, cutting, twisting, deforming, or puncturing.
• Contact with liquids.
• Using an inappropriate charging setup.
• Using improper or improvised charging cables.

General Information

• LiPo batteries are made up of cells.
• The parameters of these batteries are: Voltage measured in Volts (V), Capacity measured in milliampere-hours (mAh), and instant discharge rate (C).
• Each LiPo battery has a power connector and a charging connector.
• The power connector is used to supply power to the device requiring power.
• The charging connector is exclusively for charging the battery. (in some cases, charging is done through both power and charging connectors)
• Charging the battery is done using the charging connector, and in some advanced chargers, connecting the power connector is necessary.
• LiPo batteries are charged with special chargers for LiPo batteries that have the function of balancing the voltage of each cell and automatically stopping the charging process.
• Each LiPo battery has a maximum charging rate of 1.05X the battery capacity, which must not be exceeded during charging.
• Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
• During operation or charging, the battery temperature should not drop below 0°C or rise above 50°C.
• For long-term storage, the battery capacity should be between 15 and 25% of the maximum value.

nrg cannot guarantee that you have used correct methods of operation and have followed the charging, discharging, or storage conditions of LiPo batteries. For this reason, we reserve the right to refuse to replace, as a warranty, incorrectly used batteries (that violate the above instructions and warnings) and we are not responsible for material, moral, or loss of human life damages.