Umarex M1911 Elite Force CO2

Presentation

This replica marketed by Umarex is based on the Colt 1911 MEU. Therefore, the replica is equipped with all the specific elements of the 1911 platform with a design worthy of the 21st century.

Exterior of the replica

This replica marketed by Umarex is made almost entirely of quality metal. The only plastic elements are the ABS grip panels. The sights of the replica are fixed but well-oriented. At the front of the replica, there is a standard rail that allows the mounting of devices such as lasers or flashlights.

The safeties of the replica are as follows: Trigger safety, located at the back of the grip. Thus, without a firm grip in hand, the trigger cannot be activated. There is also a hammer safety. This safety is ambidextrous and can only be used when the hammer is cocked. The operation of the replica is similar to that of the real firearm. To cock it, the slide must be racked. At this moment, the internal mechanism is cocked, and a BB is fed into the barrel. The pistol features recoil, similar to the real firearm, this movement serving to feed the next BB and re-cock the mechanism.

Interior of the replica

The internals of the replica are made of metal, thus improving reliability. The replica is equipped with an adjustable hop-up system, but access requires the removal of the slide. The gas consumption is good as the pistol head is equipped with a Teflon seal rather than rubber. This replica is offered in a 1J variant by Umarex, thus it can be used on most playing fields.

Power Source

This airsoft replica operates with 12g CO2 cartridges. The cartridge has a special compartment inside the magazine. By using CO2, the replica can be used even if the ambient temperature is lower. Caution, do not freeze. When classic Green Gas is no longer effective, CO2 will perform well. For good performance, we recommend using high-quality consumables.