Nimrod LiPo 11.1V 2000mAh crane X3 Deans battery

This LiPo battery has 3 cells combined in a compact parallelepiped shape assembly. The battery technology allows for increased capacity and decreased dimensions compared to Nickel-based technologies. The 25C discharge rate provides sufficient current output to meet the replica's power needs.

The battery insulation is well made, and the cables and connectors are of high quality.

WARNING:

• Lithium ion Polymer (LiPo) batteries can be extremely dangerous.
• Users must take all precautions for fire, bodily harm, and property damage.
• Improper use, damage, or manufacturing defects can cause LiPo batteries to explode, catch fire, emit smoke, and pose a risk of intoxication.
• By purchasing these batteries, the user assumes responsibility for any risks associated with LiPo batteries.
• LiPo batteries are not toys and should not be left within reach of children as they can be a serious health hazard.
• Do not dispose of LiPo batteries in fire, an oven, or a microwave as they may explode.
• LiPo batteries contain/eminate electrolytes, toxic vapors, and other harmful chemicals. Handle these batteries carefully and avoid all contact with the skin, eyes, or other parts of the body. If contact occurs, rinse thoroughly with water and seek medical attention immediately.
• Do not attempt to charge mechanically or chemically damaged batteries.

Actions leading to battery damage

• Charging LiPo batteries with unbalanced chargers without automatic charging cutoff.
• Connecting in series or parallel a cell or another battery, even if they appear similar.
• Exceeding the maximum and minimum operating voltages.
• A temperature decrease or increase beyond allowable limits.
• Excessive charging current.
• Short-circuiting the battery terminals.
• Exposing the battery to mechanical shocks such as dropping, hitting, bending, cutting, twisting, deforming, or puncturing.
• Contact with liquids.
• Using improper charging installations.
• Using improper or improvised charging cables.

General information

• LiPo batteries are composed of cells.
• The parameters of these batteries are: Voltage measured in Volts (V), Capacity measured in milliamp hours (mAh), and instantaneous discharge (C).
• Each LiPo battery has a power plug and a charging plug.
• The power plug is used to power the device being supplied.
• The charging plug is used exclusively for charging the battery. (in some cases, charging is done through both the power and charging plugs)
• Charging the battery is done using the charging plug, and with advanced chargers, connecting the power plug may be necessary.
• LiPo batteries are charged using special chargers with LiPo battery balancing function and automatic charging cutoff.
• Each LiPo battery has a maximum charging rate of 1.05X the battery's capacity, which should not be exceeded during charging.
• Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
• During operation or charging, the battery's temperature should not fall below 0°C or rise above 50°C.
• For long-term battery storage, the battery capacity should be between 15 and 25% of the maximum value.

Airsoft6 cannot guarantee that correct methods of operation and adherence to charging, discharging, or storing conditions for LiPo batteries have been followed. For this reason, we reserve the right to refuse warranty replacement of improperly used batteries (which violate the instructions and warnings above) and are not responsible for material, moral, or loss of human life damages.