G&G M4 TR16 MBR 556 WH

Presentation

We are pleased to present the latest generation of advanced replicas from G&G. It can be observed that the base platform is the well-known M4, however, as the Romanian saying goes, "it looks similar but does not sprout." The manufacturer has equipped this platform with the latest innovations in rail systems and accessories, as well as a modern design aimed at providing better maneuverability. The internal part has not been neglected at all, benefiting from the latest technologies in control.

Exterior of the replica

The replica in question is called TR16 MBR 556 WH and is oriented towards DMR due to its length. As mentioned, it is part of the mainstream category of replicas manufactured by G&G, but it benefits from the latest innovations and technologies. The body is made of aluminum alloy, as well as the front rail system. The only ABS plastic elements are the grip and the stock of the replica. The front system allows for extensive accessorization. This system allows for a low profile when no accessories are mounted. The mounting of the rails is as simple and efficient as possible. The body of the replica features a new design aimed at providing a pleasant and modern appearance as well as greatly improved grip. It is equipped with several ambidextrous elements, allowing both right-handed and left-handed users to utilize the replica. The fire selector is ambidextrous, the magazine release button, and the charging lever. The design of the grip, like the body, is meant to provide a firm hold. The stock retains the SOPMOD element, namely the two side compartments where battery cells can be stored, but be careful, they are slightly reduced in size, and inserting a crane battery may present difficulties. Obviously, the stock is adjustable with 6 positions, equipped with a spare compartment, and the cap rotates to provide access to the internal space. To open it, the button on the top must be pressed.
To secure the replica, there is an ambidextrous ring above the grip for attaching a single-point sling.

Interior of the replica

G&G has equipped this replica with the new generation TR, gearbox v2, fully electronic. The trigger assembly is replaced with an electronic unit equipped with micro-switches, designed to provide significantly improved reliability compared to traditional brushes. At the back, there is a potent mosfet smaller than the GC16 series, capable of easily supporting 11.1V LiPo. Besides the greatly improved reliability, the advanced electronic system will contribute to lower battery consumption, a much quicker trigger response, and proper management of internal components, preventing premature wear. The cherry on top is the ability to implement a 3-round burst function instead of the auto selection and stopping firing when the magazine runs out of BBs. Internal components such as gears, piston, spring, and other components are standard. Each part that needs to be replaced must be carefully checked for compatibility. Another interesting aspect is the quick spring change guide. Thus, there is no need to disassemble the gearbox for spring replacement.
The hop-up chamber is with a transversal wheel and is the new model. The hop-up rubber is with W hop, which should provide significantly improved range compared to the classic rubber.

Power Supply

The airsoft replica package does not include a battery or a battery charger. We recommend using an 11.1V 1000mAh crane or crane x3 battery. To access this battery storage space, only one button needs to be pressed. It is not recommended to use a battery larger than 11.1V as the airsoft replica may be damaged. It is recommended to use quality BBs weighing 0.25g for optimal results. We advise against reusing BBs or using low-quality BBs as the replica may be damaged.