Electro River LiPo 7.4V 2000mAh Crane Battery

Overview

This Electro River battery is a LiPo type and consists of 2 cells forming a crane assembly. It has a voltage of 7.4V and a capacity of 2000mAh. The battery technology allows for very compact dimensions, making it suitable for installation in tight battery compartments. The 20C/40C discharge rate provides optimal current supply for the replica's power needs.

The battery's insulation is well-made, and the wires and connectors are of high quality. This battery is equipped with a Tamiya Mini connector.

WARNING:

• Lithium-ion Polymer (LiPo) batteries can be extremely dangerous.
• The user must take all necessary precautions against: potential fire, bodily harm, and damage to property.
• In case of improper use, damage, or manufacturing defects, LiPo batteries can cause explosions, fire, smoke, and poisoning risks.
• By purchasing this type of battery, the user assumes responsibility for any risks associated with LiPo batteries.
• LiPo batteries are not toys and should not be left within reach of children as they can pose a real health hazard.
• LiPo batteries should not be thrown into fire, placed in an oven, or microwave as they may explode.
• LiPo batteries contain/may emit electrolytes, toxic vapors, and other harmful chemicals. Handle these batteries with care and avoid any contact with skin, eyes, or other body parts. In case of contact, rinse thoroughly with water and contact a doctor immediately.
• Do not attempt to charge mechanically or chemically damaged batteries.

Actions Leading to Battery Damage

• Charging LiPo batteries with a charger that lacks balancing and automatic shut-off features.
• Connecting in series or parallel with another cell or battery even if they appear similar.
• Exceeding maximum and minimum operating voltages.
• A temperature drop or rise outside the permitted limits.
• Charging current that is too high.
• Short-circuiting the battery terminals.
• Subjecting the battery to mechanical shocks such as dropping, hitting, bending, cutting, twisting, deforming, or puncturing.
• Contact with liquids.
• Improvising an improper charging setup.
• Using inappropriate or improvised charging cables.

General Information

• LiPo batteries are composed of cells.
• The parameters of this type of battery are: Voltage measured in Volts (V), Capacity measured in milliamp hours (mAh), and instantaneous discharge (C)
• Each LiPo battery has a power connector and a charging connector.
• The power connector is used to power the device intended for powering.
• The charging connector is exclusively for charging the battery. (In some cases, charging is done through both the power and charging connectors)
• The battery is charged using the charging connector, and for some advanced chargers, connecting the power connector is also necessary.
• LiPo batteries are charged with special chargers that have balancing functions for each cell's voltage and automatic shut-off features.
• Each LiPo battery has a maximum charging rate of 1.05X its capacity, which must not be exceeded during charging.
• Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
• During operation or charging, the battery temperature must not drop below 0°C or rise above 50°C.
• For long-term storage, the battery capacity should be between 15% and 25% of its maximum value.

Airsoft6 cannot guarantee that you have used correct operating methods and have adhered to the charging, discharging, or storage conditions of LiPo batteries. For this reason, we reserve the right to refuse replacement, as a warranty, for incorrectly used batteries (which violate the above instructions and warnings) and are not responsible for material, moral damages, or loss of human life.