Cyma CM.011

Brief History

In 1990, certain firearm manufacturing companies in Germany, under the strict supervision of Heckler & Koch, developed a project for an assault rifle intended to replace the G3 model, which had been in use since 1970 and could no longer meet modern demands. The initial projects were the G11 and G41, which were to use a different caliber than the standard 5.56x40mm NATO, but unfortunately, they were abandoned due to the cancellation of the order from the Bundeswehr troops. To avoid abandoning the idea of a weapon worthy of the modern era, Heckler and Koch returned to the standard caliber of 5.56x40mm NATO. Thus, the G36 platform was born. This assault rifle was designed from the ground up. The entire operating system is designed to provide good reliability during use, low acquisition and maintenance costs. The G36 was first adopted by the Bundeswehr troops in 1996 and over time has become standard equipment for several countries. There are multiple versions of this weapon, each model serving a specific purpose.

Exterior of the Replica

This airsoft replica manufactured by Cyma mimics the G36C model, with the C standing for "Compact". Like the real weapon, the presented airsoft replica is primarily made of plastic. It is made of durable and lightweight ABS plastic. The airsoft replica weighs approximately 2.6 Kg. The weapon's length is short, making the airsoft replica perform well in confined spaces, where excellent control of the airsoft replica is necessary. Certain internal connecting elements are made of metal, ensuring the integrity of the airsoft replica.
The airsoft replica is equipped with an adjustable, integrated sighting system that can be removed if necessary, allowing full use of the large upper rail.
At the front, there is a standard rail that allows the airsoft replica to be accessorized with a grip, flashlight, or possibly a tactical laser. The rail can also be mounted on the sides of the front grip. At the front of the rail and above the grip on the left side, there are holes that allow the attachment of a sling mounting system for the airsoft replica. The mag catch is located in the center of the replica under the trigger guard. The selector is ambidextrous and has 3 positions: SAFE - SEMI - AUTO.
The stock of the airsoft replica folds to the right and locks firmly in position. The back part of the stock is covered with soft rubber to improve grip during use.

Interior of the Replica

Inside the toy, there is a standard Version 3 metal gearbox with good upgrade potential. The hop-up chamber is made of plastic and is adjustable. The adjustment is easy, and once set, it stays in position. To adjust the hop-up, the cocking lever located at the top must be operated. The inner barrel has a standard diameter, but in combination with the adjustable hop-up, it allows for targeting at a considerable distance. The airsoft replica has a ball speed of approximately 105-110 meters per second, measured with 0.20g BBs.

Power Supply

The airsoft replica comes with an 8.6V 1100mAh crane-type battery, and the battery storage compartment is located inside the front grip. To remove the grip, it is sufficient to remove the pin from the top of the grip. It is recommended to use a battery no larger than 9.6V, as any higher voltage may damage the airsoft replica. The use of high-quality BBs is recommended. Using low-quality BBs and reusing BBs can cause serious malfunctions to the airsoft replica.