ASG LiPo Battery 7.4V 1300mAh Crane X2

Presentation

This ASG battery is of the LiPo type and consists of 2 cells forming a Crane X2 assembly. It has a voltage of 7.4V and a capacity of 1300mAh. The battery technology allows for very compact dimensions of the entire assembly, making it suitable for installation in very tight battery compartments. The 25C discharge rate allows for optimal current supply for the replica's power needs.

The battery's insulation is well-made, and the wires and connectors are of high quality. This battery is equipped with a Mini Tamiya connector.

WARNING:

• Lithium Polymer (LiPo) batteries can be extremely dangerous.
• The user must take all precautions against: potential fire, bodily injury, and property damage.
• In case of improper use, damage, or manufacturing defects, LiPo batteries can cause explosions, fire, smoke, and poisoning risks.
• By purchasing this type of battery, the user assumes responsibility for any risks associated with LiPo batteries.
• LiPo batteries are not toys and should not be left within reach of children as they can pose a real danger to their health.
• LiPo batteries should not be thrown into fire, placed in an oven, or microwave as they may explode.
• LiPo batteries may contain/release electrolytes, toxic vapors, and other harmful chemicals. Handle these batteries with care and avoid any contact with skin, eyes, or other body parts. In case of contact, rinse thoroughly with water and seek medical attention immediately.
• Do not attempt to charge mechanically or chemically damaged batteries.

Actions Leading to Battery Damage

• Charging LiPo batteries with a charger that lacks balancing and automatic shut-off features.
• Connecting in series or parallel with another cell or battery even if they appear similar.
• Exceeding maximum and minimum operating voltages.
• A drop or rise in temperature outside the allowed limits.
• Charging current that is too high.
• Short-circuiting the battery terminals.
• Subjecting the battery to mechanical shocks such as: dropping, hitting, bending, cutting, twisting, deforming, or puncturing.
• Contact with liquids.
• Improvising an inadequate charging setup.
• Using inappropriate or improvised charging cables.

General Information

• LiPo batteries consist of cells.
• The parameters of this type of battery are: Voltage measured in Volts (V), Capacity measured in milliamp hours (mAh), and instantaneous discharge (C)
• Each LiPo battery has a power connector and a charging connector.
• The power connector is used to power the device intended for powering.
• The charging connector is exclusively for charging the battery. (in some cases, charging is done through both the power and charging connectors)
• The battery is charged using the charging connector, and for some advanced chargers, connecting the power connector is also necessary.
• LiPo batteries are charged with special LiPo battery chargers that have cell voltage balancing and automatic shut-off features.
• Each LiPo battery has a maximum charging rate of 1.05X its capacity, which must not be exceeded during charging.
• Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
• During operation or charging, the battery temperature must not drop below 0°C or rise above 50°C.
• For long-term storage, the battery capacity should be between 15 and 25% of its maximum value.

Airsoft6 cannot guarantee that you have used correct operating methods and have adhered to the charging, discharging, or storage conditions of LiPo batteries. For this reason, we reserve the right to refuse replacement, as a warranty, for improperly used batteries (which violate the above instructions and warnings) and are not responsible for material, moral damages, or loss of human life.