Frequently Asked Questions
This specially shaped LiPo battery can be used with replicas that have well-tuned internals.
Equipment Specifications
| Battery Connector | Small Tamiya |
| Magazine Capacity | 1800 mAh |
| Voltage | 11.1 V |
| Battery Shape | Compact |
| Discharge | 30 C |
| Battery Type | Li-Po |
| Width | 36.5 mm / 36.5 mm |
| Height | 13.5mm / 7.5 mm |
| Length | 103 mm / 103 mm |
Product Description
Presentation
A2A, or more broadly Addicted to Airsoft, is a newly established Chinese company in the airsoft industry that produces quality components at affordable prices. Due to its recent emergence, it is not very well-known among airsoft players, but this will change with the exploration of its products.
Description
This LiPo battery consists of 3 cells, of which 2 are combined into a single compact assembly while 1 is separate, all cells being connected by electrical wires. This configuration allows for better positioning in the battery compartment. This battery, due to its high discharge rate of 30C, allows use in replicas capable of higher speeds or rates of fire, modified for this purpose. It is important to note that using this battery with a replica whose specifications or internal structure cannot handle such high voltages and currents poses a risk of damaging both the replica and the battery.
The battery's insulation is well-made, and the connector wires are low-resistance quality wires.
Packaging
The batteries are individually packaged in protective foil against mechanical shocks.
WARNING:
- Lithium-ion Polymer (LiPo) batteries can be extremely dangerous.
- The user must take all precautions against: potential fire, bodily harm, and property damage.
- In case of improper use, damage, or manufacturing defects, LiPo batteries can cause explosions, fire, smoke, and poisoning risks.
- By purchasing this type of battery, the user assumes responsibility for any risks associated with LiPo batteries.
- LiPo batteries are not toys and should not be left within reach of children as they can pose a real health hazard.
- LiPo batteries should not be thrown into fire, placed in an oven or microwave as they may explode.
- LiPo batteries contain/may emit electrolytes, toxic vapors, and other harmful chemicals. Handle these batteries with care and avoid, under any circumstances, contact with skin, eyes, or other body parts. In case of contact, rinse thoroughly with water and contact a doctor immediately.
- Do not attempt to charge mechanically or chemically damaged batteries.
Actions Leading to Battery Damage
- Charging LiPo batteries with a charger that does not have balancing and automatic shut-off features.
- Connecting in series or parallel with another cell or battery even if they appear similar.
- Exceeding maximum and minimum operating voltages.
- A drop or rise in temperature outside the allowed limits.
- Excessively high charging current.
- Short-circuiting the battery terminals.
- Subjecting the battery to mechanical shocks such as: dropping, hitting, bending, cutting, twisting, deforming, or puncturing.
- Contact with liquids.
- Improvising an inadequate charging setup.
- Using inappropriate, improvised charging cables.
General Information
- LiPo batteries are composed of cells.
- The parameters of this type of battery are: Voltage measured in Volts (V), Capacity measured in milliamp-hours (mAh), and instantaneous discharge (C)
- Each LiPo battery has a power connector and a charging connector.
- The power connector is used to power the device intended for powering.
- The charging connector is exclusively for charging the battery. (in some cases, charging is done through both the power and charging connectors)
- The battery is charged using the charging connector, and for some advanced chargers, it is necessary to connect the power connector as well.
- LiPo batteries are charged with special chargers for LiPo batteries that have the function of balancing the voltage of each cell and automatic shut-off of charging.
- Each LiPo battery has a maximum charging rate of 1.05X of the battery capacity, which must not be exceeded during charging.
- Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
- During operation or charging, the battery temperature must not drop below 0°C or exceed 50°C.
- For long-term storage of the battery, the battery capacity should be between 15 and 25% of the maximum value.
Airsoft6 cannot guarantee that you have used correct operating methods and have adhered to the conditions for charging, discharging, or storing LiPo batteries. For this reason, we reserve the right to refuse replacement, as a warranty, for improperly used batteries (which violate the instructions and warnings above) and are not responsible for material, moral damages, or loss of human life.